3.1 Gallon Replacement Gas Tank Harley 79-1981 Ironhead Sportster Bobb – American Classic Motors

$ 60.50 · 4.8 (629) · In stock

BRAND NEW PART # 38-0107 or 20-61 VT No: 38-0107 Gas tank is single cap style with a right side petcock location, and a fuel capacity of 3.1 gallons. Tank is made 2" wider than stock and includes stock style mounts. Check the tank for flaws or fit before painting. Do not grind or sand the seams or joints. Clean the i
BRAND NEW PART # 38-0107 or 20-61 VT No: 38-0107 Gas tank is single cap style with a right side petcock location, and a fuel capacity of 3.1 gallons. Tank is made 2 wider than stock and includes stock style mounts. Check the tank for flaws or fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal which helps stop leaks and prevents corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of petcock. The center-to-center width between front and rear mount holes measures 15-1/4. Fits: XL 1979-1981: Country of Origin: Imported Top Length: 16 Bottom Length: 13 Rear Width: 6 Front Width: 10 Rear Height: 3 Front Height: 8 Front Tunnel Height: 3.5 Rear Tunnel Height: 1.5 Tunnel Length: 16 Top Tunnel Width: 2 1/8 NOTE: Utilizes stock H-D gas cap & petcock.

BRAND NEW

PART # 38-0107 or 20-61

VT No: 38-0107

Gas tank is single cap style with a right side petcock location, and a fuel capacity of 3.1 gallons.

Tank is made 2 wider than stock and includes stock style mounts.

Check the tank for flaws or fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal which helps stop leaks and prevents corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of petcock.

The center-to-center width between front and rear mount holes measures 15-1/4.

Fits: XL 1979-1981: Country of Origin: Imported

Top Length: 16

Bottom Length: 13

Rear Width: 6

Front Width: 10

Rear Height: 3

Front Height: 8

Front Tunnel Height: 3.5

Rear Tunnel Height: 1.5

Tunnel Length: 16

Top Tunnel Width: 2 1/8